What's in the box — unboxing your Aerowave
Every item that arrives the day your boat lands. No surprises, no missing adapters, no "you'll need to buy a pump separately." Here's the full kit.
One sealed, factory-strapped box arrives at your door. Inside is a single navy heavy-duty carry bag holding the boat — and a smaller bag with the pump, oars, repair kit and paperwork. Cut the strap, unzip the bag, and you're fifteen minutes from a fully inflated, ready-to-launch catamaran. Below is the complete pack list so you know exactly what to expect before you ever sign for delivery.
The complete pack list
Heat-welded VALMEX® hull
Rolled and strapped inside the carry bag — German VALMEX® 1.2 mm Heavy-Plus on every Viper, 0.9 mm on AeroCat. Four-step heat-welded seams, factory pressure-tested to 1.5× working PSI.
8–10 PSI high-pressure hard AirDeck floor
Use the lithium pump only for the first minute, until the floor reaches approximately 2–2.5 PSI. Then switch to the supplied manual pump to reach the recommended 8–10 PSI. Do not use the lithium pump for final AirDeck pressure; it will not bring the floor to 8–10 PSI.
Hand / foot pump + dual-stage hose
The lithium pump is suitable for the boat tubes, where the over-inflation valves control excess pressure. For the hard AirDeck floor, use it only to reach approximately 2–2.5 PSI, then use the manual pump and gauge to finish at 8–10 PSI.
Two aluminium oars
Lightweight three-piece oars with marine-grade rowlocks already fitted to the boat. Stowed beside the hull in the carry bag.
Repair & maintenance kit
Colour-matched VALMEX® patches, two-part adhesive, valve wrench and spare valve cores in a zippered navy pouch. Everything you need for a field repair.
Owner manual + warranty card
Printed Aerowave catamaran manual, your CE certification page, model-specific warranty card and a Welcome Pack with care guides.
Strap, zip, unroll. That's it.
No flat-pack panic. No tools required to assemble. The boat ships fully factory-tested — your job on day one is simply to lay out the hull and inflate each chamber correctly. Use the lithium pump on the tubes and only for the first minute on the AirDeck, to approximately 2–2.5 PSI. Then change to the manual pump to reach 8–10 PSI. Most first-time owners are floating within 15 minutes of opening the bag.
- All adapters pre-matched to the boat's valves
- Manual + Welcome Pack on top of the hull, not buried at the bottom
- Carry bag doubles as your long-term storage bag
What isn't in the box
We'd rather tell you up front than have you discover it on launch day.
Ready to see the range?
Every Aerowave Viper and AeroCat ships with the full pack list above — no upsells to "complete" your kit.