Aerowave Swift Tender 230
2.3 m Swift Tender — the compact 1.2 mm VALMEX tender built for daily yacht duty.
4.9verified owner reviewsShown in USD. Billed in AUD ($3,050) at your card's live rate.
The story behind the build
Aerowave Swift Tender 230 SI
The smallest boat in the Swift Tender Series — a compact 2.3m sports monohull built as a serious yacht tender, cruiser runabout and shore-run boat. Deep-V hull profile, high-pressure woven air deck floor, and the same premium 1.2mm German VALMEX® PVC we use on our flagship Viper catamarans.
🛡️ Fabric is the whole story
Every competitor tender in this size class is built from either 0.9mm Chinese PVC or, at best, 0.9mm German VALMEX®. Ours are built from 1.2mm VALMEX® Heavy Plus — the commercial-grade German fabric used on rescue boats and workboats. That's 33% thicker, with a 10–12 year hull life vs the 3–7 years you get from 0.9mm. Same brand-name competitors. Genuinely different boat.
Built for
- Yacht, motor-cruiser and sailboat tenders
- Mooring transfers, shore-runs, dinghy work
- Calm coastal, estuary, harbour and river use
- Compact boot, garage or lazarette storage — packs to 110×60×38cm
Why this boat
- Premium 1.2mm German VALMEX® PVC — the same industrial fabric used on commercial rescue and workboats
- Thermo-welded seams, not glued — no seam failures in the tropics
- High-pressure woven air deck floor — rigid underfoot, packs down small, no scratched gelcoat when stowed
- 3+1 chamber design — three hull chambers plus a keel; you get home even if one is punctured
- Over-pressure safety valves on every chamber — leave it inflated in 45°C sun, no blown seams
- CE certified to ISO 6185 and EU Directive 2013/53/EU — the same marine safety standard required in Europe
What's included
Aluminium oars · aluminium bench seat · high-pressure woven air deck floor · stainless D-rings and grab handles · drain valve · CE compliance plate & HIN · over-pressure relief valves · heavy-duty carry bag · repair kit.
Backed by a 5-Year Limited Hull Warranty
Comprehensive cover on hull fabric, welded seams, valves, air deck and fittings when used and stored per the care guide.
How we compare
Aerowave Swift Tender 230 SI vs Zodiac Cadet 230 Era
| Aerowave 230 SI | Zodiac Cadet 230 Era | |
|---|---|---|
| Price | A$2,250 | ~A$2,550 |
| Fabric | 1.2mm German VALMEX® PVC | 0.9mm PVC |
| Seams | Thermo-welded | Glued |
| Chambers | 3 + keel | 3 |
| Warranty | 5 years | 3 years |
You save A$300 with us — for a thicker fabric, welded seams and a longer warranty.
Buy this boat, get looked after for life — and start saving for the next one
Every owner joins AeroWave Rewards — earn points on this order and every upgrade after — and can open an AeroWallet to put money aside for their next boat, with a 5% top-up bonus from us when they buy.
- ▸ 10% off every accessory — capped at A$50 saving per order
- ▸ Up to A$650 off your next boat with points
- ▸ AeroWallet: save toward your next boat, +5% top-up when you buy
- ▸ 3,000 pts + A$200 boat credit for every mate you refer
The full numbers
- Length
- 230cm / 7'6"
- Width
- 133cm / 4'7"
- Tube diameter
- 38cm
- Chambers
- 3+1
- Max HP
- 5HP
- Net weight
- 43kg
- Max load
- 350kg / 772lbs
- Max persons
- 2
- Packed size
- 110×60×38cm
- Fabric
- 1.2mm German VALMEX® PVC
- Floor
- High-pressure woven air deck
- Seams
- Thermo-welded
What's included
- Aluminium oarsFull-length marine aluminium oars.
- Aluminium seatOne removable aluminium bench seat.
- 10 PSI high-pressure air deck floorBuilt with specialised drop-stitch technology and covered in VALMEX non-slip material. A firmer underfoot feel for standing, fishing and moving around with confidence.
- Stainless D-rings & handlesMarine-grade 316 stainless fittings.
- Over-pressure safety valvesOne per chamber — standard on every Aerowave.
- Heavy-duty carry bagReinforced storage / transport bag.
- CE plate & HIN numberReady for state registration.
- Marine plywood transom (standard)Sealed marine-grade plywood. 4 mm light-grey aluminium transom available as +A$350 upgrade.
- Bow & stern towing ringsHeavy-duty D-rings — safe to tow behind a mothership or larger cruiser.
The cheapest way into a 1.2 mm hull — from A$3,050.
Most first-time buyers start with a A$1,500–A$2,500 boat, discover the 0.9 mm tubes are weeping at the seams by season three, and buy again. The Swift Tender is built on the same 1500 GSM / 1.2 mm VALMEX® Heavy Plus fabric as the flagship Vipers — the same 10–12 year hull, in the smallest, most affordable size we make.
- ✔ 2.30 m · 3 people · from A$3,050
- ✔ 2.70 m · 3 people · from A$3,250
- ✔ 2.90 m · 4 people · from A$3,549
- ✔ 5-year hull warranty on every tender
Budget-conscious, but not a budget boat. One build that lasts, instead of two that don't.
Compare the tendersThe problem: the advertised price is never the price you pay.
You find a boat that looks cheap, then the shade, the wheels, the pump, the seats and the rod holders each get added at the checkout — and you are A$1,500 past where you started. Everything below is already on the boat when it lands at your door.
The outcome: one price, one build, and a boat that is still working in 10–12 years instead of being replaced at three to five. You buy one boat, not two.
Build, price, checkout.
Everything in your package — hull colour, wheels, Bimini, floor, fabric — locked in below. Pay the live price shown.
warranty
EXPRESS PayGooglePayLinkWavePay · Pay in 4BECS · EFT · PayID
- Transom: marine plywood standard
- Hull: Arctic Grey / Black
- Wheels: Storm Grey
- Floor: Black Valmex 1.0mm Non-Skid/Slip
By continuing to checkout you accept our Terms & Conditions and Order & Refund Policy. Your acceptance is recorded with a timestamp.
Your price, delivered to your door — freight included.
We email the full PDF quote (spec, freight, finance, WavePay) to your inbox in under 60 seconds. No spam — one quote, one follow-up.
Talk to Adam or Gary — they'll give you a fully-landed price in 60 seconds. Freight, duty, GST — all included, no surprises at the door.
Email yourself a copy and we'll hold today's price for 7 days — no card, no obligation.
*AMMF indicative only, subject to approval.
Four weekends that actually happen with this boat.
We stopped selling specs a while back. Here's what owners actually do with the Aerowave Swift Tender 230 SI — pick the one that sounds like your Saturday.
Yacht tender
Deflates and stows below deck.
Under 20 minutes from stern hook to cabin locker. No davits, no drying rack on the deck.
Anchor-out fisho
Get to the ledge nobody else can reach.
Beach it, wade it, drag it up. 1.2 mm fabric shrugs off a mooring pole or a submerged branch that would slice a thinner tube.
Family runabout
Ramp to reef with the whole crew.
Non-slip air deck, low freeboard entry — the kids can climb in wet without slipping.
Caravan explorer
One bag on the roof, one under the bed.
Grey-nomad friendly. Two carry bags, 6-minute setup, then you're on hidden coves the tour boats can't reach.
See it from every angle.
Australia: the price you see is the landed price to your door.
For Australian deliveries freight, GST, import duty and customs clearance are all included and already paid before your boat ships. Nothing to pay the courier, no customs invoice weeks later.
Shipping overseas? Freight is still included in the price. Your own country’s import duty and VAT / GST are payable on arrival unless your quote says we’re covering them — we’ll give you the exact figure before you pay.
Australian designed, shipped from Hong Kong. Every boat is designed and engineered on the NSW Central Coast, then built to our spec offshore. International orders ship direct from our Hong Kong dispatch hub — that is how we keep the landed price competitive instead of doubling or tripling the freight by routing through Australia first.
Buying overseas costs you nothing in extra delivery days.
Your boat leaves our overseas manufacturer on DHL Express and is at your door in 7–10 days — the same window a local seller takes to truck a boat interstate. Same wait, insured and tracked the whole way, and the import side is already handled.
- Duty & GST paid before dispatch
- Customs clearance handled by us
- DHL Express door-to-door, fully insured
- Live tracking + signature on delivery
- Overseas: freight included, local duty on arrival
Competitors typically add A$600+ for freight and GST on top of their advertised price. Ours is already in. The only possible extra is a flat A$600 truck-leg contribution for true remote postcodes (NT, Far-North QLD, remote WA, regional TAS, outback SA).
Frequently asked questions
Will this fit on a yacht as a tender?
Yes — the 230 SI is built specifically for yacht tender use. It packs to 110×60×38cm and stows in most cockpit or lazarette lockers.
What outboard should I run?
The 230 SI is rated to a maximum of 4HP. A 2.5–3.5HP outboard is the practical sweet spot for tender work.
Is the fabric the same as your bigger boats?
Yes. Every Tender Series boat is built on 1.2mm German VALMEX® — the same commercial-grade PVC used on our flagship Viper range.
Compare this boat side-by-side with another model
Build your own branded PDF comparison — specs, inclusions and pricing, ready to download or share.
Need insurance for your boat?
Send us your boat and usage details and we'll forward the request to suitable Australian marine insurance specialists — one short form, no obligation.
Before you spend a cent
Buying from Australia, delivered to United States
You have never heard of us, we are on the other side of the world, and the internet is full of fakes. Fair enough. Here is everything you would need to check us out, in one place — no forms, no chat bot.
Australian designed business
Easy Inflatables, Avoca Beach NSW 2251. ABN 96 856 548 613. International orders ship from our Hong Kong hub.
222 owner reviews, 4.8 average
Read them in full, good and bad, on our reviews page.
CE certified, 7-year hull warranty
ISO 6185-3 and EU Directive 2013/53/EU. Warranty honoured worldwide.
Tracked, insured, door to door
Freight included on our supported lanes. Duty payable on arrival, stated up front.
- Who am I actually buying from?
- Easy Inflatables, Avoca Beach NSW 2251, Australia. ABN 96 856 548 613. Sean is the owner and skipper, Gary Stewart handles sales on +61 2 4335 1603, Karen Matthews handles email. The boats are Australian designed; international orders ship from our Hong Kong dispatch hub so your landed price stays competitive. Phone us before you pay a cent — a real person answers.
- Is this really an Australian product?
- Yes — Australian designed and engineered on the NSW Central Coast. Manufacturing is done offshore to our spec, and international orders ship direct from our Hong Kong dispatch hub. If we routed every boat through Australia first, the freight alone would roughly double or triple your cost for the same hull.
- What do I pay, and what is not included?
- The price you see is the boat with freight already included on our supported lanes. Import duty and local taxes are payable by you on arrival — we do not hide them inside the price, and we do not pretend they do not exist.
- How do I pay safely?
- Card through Stripe (Visa, Mastercard, Amex, Apple Pay, Google Pay) or bank transfer. Card payments carry your bank's own dispute protection. We never ask for crypto, gift cards or payment to a personal account.
- What if it arrives damaged?
- Every boat ships fully tracked and insured door to door. Photograph the carton and the boat on arrival and email us — transit damage is claimed and replaced through us, not left with you and the courier.
- Is the warranty real outside Australia?
- Yes. The 7-year hull warranty on 1.2 mm VALMEX Heavy Plus and Orca Hypalon hulls applies wherever you are. Replacement parts are held in Australia and at our overseas hub and go out by express courier to your door.
- Is the boat actually certified?
- All Aerowave catamarans are CE certified to ISO 6185-3 and EU Directive 2013/53/EU. Certification paperwork is supplied with the boat — ask and we will send it before you order.
Customer reviews
Verified Google reviews from real Aerowave Swift Tender 230 SI owners across Australia.
Verified · WavePay
Own it today · pay over 8 weeks
Your fortnightly
4 fortnightly instalments · total $3,050 · no interest, no fees.
- Stripe SetupIntent — no bureau ping
- Boats-only · Australian & international buyers welcome
- Factory build starts at instalment 2
Card verified in about a minute · no credit check · nothing else charged today.
Your build timeline
Deposit paid
Drag to preview each stage. Fortnightly amount stays the same.