TMAerowave Viper 365 Open Bow
The open-bow catamaran built for fishing, families and remote-beach days.
5.0· 21 Google reviewsCharged in USD — the price you see is the price your card is charged. No conversion markup from us.
Look how easy it packs into the back of a Mazda CX-5.
Drop the two split rear seats and the whole rig slides straight in — boat, high-pressure Air Deck floor, both aluminium bench seats, the oars, the under-seat bag, the Bimini (pulled apart and packed flat), the 22 PSI lithium pump, a small scud-type anchor and accessories, plus the outboard, fuel tank and life jackets. No trailer, no boat ramp queue. Pull up, carry it down, and you're on the water.
The bag pictured has an actual AeroCat 360 packed inside it, with the high-pressure Air Deck floor added. Our boat bags take everything up to a Viper 430.
- · Hull, Air Deck floor, 2× aluminium seats and oars all in the one bag
- · Under-seat bag, dismantled Bimini, 22 PSI lithium pump and scud anchor alongside
- · Fits a mid-size SUV boot with the rear seats folded
- · Garage-friendly storage — no trailer parking
Compare the landed price, not just the hull price.
Every price on this page includes air freight to your door Australia-wide. With 1500 GSM / 1.2 mm VALMEX® Heavy Plus fabric, the Viper is built as a complete long-term ownership proposition—not a low headline price followed by freight and upgrade costs.
Owners of this boat also add
One-click add — ships free with your boat.
The only difference is 350 mm (35 cm) of length.
Customers keep asking us: "What's actually different between the Viper 365 Open Bow and the Viper 400?"Straight answer — the hull is 350 mm (35 cm) shorter. That's it. Same 1.2 mm German VALMEX fabric, same catamaran hull shape, same open-bow layout, same 5 + 2 year Viper hull warranty, same full-package inclusions (Bimini, LockPro Plus wheels, electric + hand pump, seats, bags, repair kit). Same build, same factory, same quality — just 35 cm shorter and lighter on the wallet.
- • Length: 3.65 m
- • Capacity: 5 people
- • Max HP: 40 hp short shaft
- • Fabric: 1.2 mm VALMEX
- • Warranty: 5 + 2 years
- • Length: 4.00 m (+350 mm / +35 cm)
- • Capacity: 6 people
- • Max HP: 40 hp
- • Fabric: 1.2 mm VALMEX (identical)
- • Warranty: 5 + 2 years (identical)
Pick the 365 if you want a lighter, easier-to-store, easier-to-tow catamaran for up to 5 people. Pick the 400 if you regularly load 6 people or want the extra 35 cm of deck space. Everything else — the fabric, the hull, the finish — is the same boat.
Why the Viper costs a little more — and pays you back for over a decade
No one else in this class is building on this fabric. Every Viper hull is 1500 GSM / 1.2 mm VALMEX® Heavy Plus — a third more material in every tube than the 1100 GSM / 0.9 mm fabric this size of boat is usually built from.
That's why we can do what the others can't: a 7-year hull warranty. And it's why your Viper is designed to last 10–12 years of real weekends, not two or three summers.
A cheaper 0.9 mm boat might cost less today. Realistically, in Australian sun, it's a 3–5 year boat — so you'd buy it twice in the time you own one of ours. You're not paying more for the same thing. You're paying for one build instead of two.
One boat. One build. It just works.
The full numbers
Aerowave Viper 365 Open Bow — Full Package
What's included in the Full Package
15 items- 01Premium Catamaran Hull Platform
Twin-hull stability for a more confidence-inspiring ride and reduced roll at rest.
- 02German VALMEX® 7321 Heavy Plus 1.2mm fabric
Commercial-grade fabric built for abrasion, UV exposure and long-term ownership confidence.
- 038–10 PSI high-pressure hard AirDeck floor
Use the lithium pump only for the first minute, until the floor reaches approximately 2–2.5 PSI. Then switch to the supplied manual pump to reach the recommended 8–10 PSI. Do not use the lithium pump for final AirDeck pressure; it will not bring the floor to 8–10 PSI. The lithium pump is suitable for the boat tubes, where the over-inflation valves control excess pressure.
- 044 × Over-Inflation Safety Valves (one per chamber)
Standard on every boat — premium pressure protection when heat causes air pressure to rise. Most competitors don't include these.
- 05Full Bimini Top Kit
Shade and comfort already sorted for longer days on the water.
- 06LockPro Plus wheel kit — fitted during production
The stainless mounting plates are secured to the transom with eight lugs, and the wheel storage bag is included.
- 072 × Removable Aluminium Bench Seats
Flexible passenger and fishing layout options.
- 082× padded under-seat storage bags
Two bags are included only with orders placed from 15 August 2026 onwards. Orders placed before 15 August 2026 include 1× under-seat storage bag. One bag carries Easy Inflatables branding; the other is identical in size, material and quality — just unbranded.
- 09Premium Aluminium Grilled Transom
Stronger rear mounting platform for improved engine support and durability — no plastic components.
- 102 × heavy-duty rod holders + 2 × deck-mounted rod-holder bases
Bases glued to the deck by our production team; clip-in heavy-duty rod holders included — fishing-ready straight out of the bag.
- 1122 PSI 12V lithium electric air pump with built-in battery
Cordless inflation to full working pressure — no car engine, no compressor required.
- 12Grilled deck drainage system
No plastic components. Plastic bung drains trap prawn heads, weed and grit; the grilled deck flushes clear every time.
- 13Heavy-Duty Bow Bridle
Included for beach launching, towing and retrieval.
- 14CE compliance plate and HIN fitted to the aluminium transom
Supplied with the manufacturer’s Statement of Conformity. Registration requirements vary by state — check with your state authority.
- 151 × large Aerowave carry bag — included
One primary carry bag sized to hold the hull, removable air deck, seats, pumps, repair kit and supplied accessories. Fits Aerowave boats up to and including the Viper 430.
Factory-to-door quality control and compliance checks
Before your boat leaves the factory, we run an eight-point quality control and compliance check against your exact order — fabric, seams, transom, inflation, fittings and pack list — so what arrives at your address is what you paid for.
Build sheet lock
Factory confirms hull colour, length, transom spec, floor type and fittings against your order before fabric is cut.
Fabric spec verification
We cross-check the VALMEX® GSM and thickness rating against the signed-off sample so the hull matches what was promised.
Seam and weld inspection
Every main seam, transom joint and chamber bond is pressure-tested and visually inspected before full inflation.
Transom and fitting stress check
Transom height, backing plate and motor-mount geometry are verified against the rated HP max for your model.
Chamber inflation test
Each air chamber is inflated to operating PSI and held to confirm no creep, leaks or valve faults before the boat is signed off.
Pre-shipment photo pack
We receive factory photos of your actual boat before it leaves, so any issue is caught before freight, not after.
Final pack-list audit
Seats, bags, Bimini, pump and accessories are checked off against your configured package list before the carton seals.
Door-step arrival check
You inspect on delivery. If anything does not match the compliance pack, we sort it — no arguments, no run-around.
Build, price, checkout.
Aerowave Viper 365 Open Bow — pick your package, choose your colours, pay securely.
Your price, delivered to your door — freight included.
We email the full PDF quote (spec, freight, finance, WavePay) to your inbox in under 60 seconds. No spam — one quote, one follow-up.
Talk to Adam or Gary for a written price with freight and import charges clearly separated for your country.
Watch the Viper 330–430 go from boat bag to water — and back again.
The whole Viper 330–430 range packs down cleanly for caravan boots, ute trays and compact storage without sacrificing the VALMEX® hull feel on the water.
Viper 330–430 — from boat bag to ready-to-launch.
Full put-together walkthrough — floor, tubes, transom, ready to motor. Same process across the entire Viper 330–430 range.
Viper 330–430 — back into the bag at the campsite.
Deflate, fold, roll and stow. The whole Viper 330–430 process is built for owners who need a serious boat that still packs away properly.
See it from every angle.
Every detail, engineered to last
From the reinforced aluminium transom to the heat-welded seams and premium 1500 GSM / 1.2 mm VALMEX® fabric tubes — this is what sets the Viper apart.
Frequently asked questions
What motor suits the Viper 365 Open Bow?
The Viper 365 is rated up to 30HP 4-stroke short shaft, with 20HP 4-stroke short shaft recommended for the best balance of cruise speed, economy and weight.
How many people does the Viper 365 carry?
Rated capacity is 750kg or up to 6 adults. The open-bow layout gives families room to move and fishos space to cast around the bow.
Why an open-bow catamaran instead of the enclosed-bow Sovereign?
The open bow gives you more usable deck space for fishing, gear, divers and kids, while the twin-hull catamaran shape still delivers stability at rest and a confidence-inspiring ride. The Sovereign keeps a fully enclosed forward locker for buyers who prefer that flagship layout.
Is the Viper 365 easy to launch and store?
Yes. It includes Italian 316 Stainless LockPro launch wheels for beach and ramp use, and packs into two bags (hull + floor/accessories) at approximately 125 x 70 x 42cm — fits most SUVs and 4WDs.
What warranty is included?
7-year structural hull warranty backed by Australian phone support, setup advice and spare parts. Premium German VALMEX® 7321 Heavy Plus 1.2mm fabric and thermo-welded seams are built for long-term ownership.
Is delivery included?
Yes — delivery is included in the price of every boat. Your boat ships by express courier (DHL Express, FedEx or UPS) door-to-door, up to 2 weeks after it is built. GST, import duty and customs clearance are all covered, so there is nothing to pay on arrival. The only extra is a flat A$300 remote delivery fee for a small number of remote Australian postcodes — that is our own charge for the extra road leg, not a courier surcharge. Enter your postcode in the checkout box above to see if it applies.
How do I inflate the hard AirDeck floor to 8–10 PSI?
Use the lithium pump only for the first minute, until the floor reaches approximately 2–2.5 PSI. Then change to the supplied manual pump to reach the recommended 8–10 PSI. Do not use the lithium pump to try to reach final AirDeck pressure; it will not work. The lithium pump is suitable for the boat tubes, and their over-inflation valves control excess pressure.
Check us before you trust us.
Every review is on Google, not on our page
We don't paste quotes onto our site. Open our Google Business Profile and read every review, with the reviewer's profile and the date it was left.
A young business, an honest count
We've been selling Aerowave boats in Australia since 2023. The review count is small because we are — every one of them is a real customer, and every one can pick up the phone to the same small team.
Ask us the hard questions
Call Gary on +61 2 4335 1603. Ask how the hull is built, how it's shipped, what goes wrong and what the warranty actually covers. Straight answers, no script.