TMAerowave WaveRunner 380 Series 3 Catamaran Package
Catamaran stability with a grey/black Bimini sun top included as standard.
5.0· 21 Google reviews50% secures your build slot. Balance due only once your boat is finished and passes QC. Deposits are non-refundable once building starts.
Charged in USD — the price you see is the price your card is charged. No conversion markup from us.
Look how easy it packs into the back of a Mazda CX-5.
Drop the two split rear seats and the whole rig slides straight in — boat, high-pressure Air Deck floor, both aluminium bench seats, the oars, the under-seat bag, the Bimini (pulled apart and packed flat), the 22 PSI lithium pump, a small scud-type anchor and accessories, plus the outboard, fuel tank and life jackets. No trailer, no boat ramp queue. Pull up, carry it down, and you're on the water.
The bag pictured has an actual AeroCat 360 packed inside it, with the high-pressure Air Deck floor added. Our boat bags take everything up to a Viper 430.
- · Hull, Air Deck floor, 2× aluminium seats and oars all in the one bag
- · Under-seat bag, dismantled Bimini, 22 PSI lithium pump and scud anchor alongside
- · Fits a mid-size SUV boot with the rear seats folded
- · Garage-friendly storage — no trailer parking
Owners of this boat also add
One-click add — ships free with your boat.
Why the WaveRunner earns its keep for a decade
Every WaveRunner hull is 1500 GSM / 1.2 mm VALMEX® Heavy Plus — a third more material in every tube than the 1100 GSM / 0.9 mm fabric most boats this size are built from.
That's what lets us back it with a 5-year hull warranty and a designed service life of 10–12 years of real weekends. Pay a little more once — don't pay twice.
One boat. One build. It just works.
The full numbers
Aerowave WaveRunner 380 Series 3 Catamaran Package
What's included
13 items- 01WaveRunner 380 Series 3 Catamaran
- 021.2mm Valmex® PVC
- 03Fully Thermo-Welded Seams
- 04Reinforced Air-Deck Floor
- 05LockPro Plus wheel kit — fitted during production
The stainless mounting plates are secured to the transom with eight lugs, and the wheel storage bag is included.
- 062 x Rod Holder Mount Kits
- 074 × Over-Inflation Safety Valves (one per chamber) — standard on every boat. Most competitors don't include these.
- 08Grey or black Bimini sun top
- 09Oars & Rowlocks
- 10Repair Kit & Storage Bag
- 118–10 PSI high-pressure hard AirDeck floor
Use the lithium pump only for the first minute, until the floor reaches approximately 2–2.5 PSI. Then switch to the supplied manual pump to reach the recommended 8–10 PSI. Do not use the lithium pump for final AirDeck pressure; it will not bring the floor to 8–10 PSI. The lithium pump is suitable for the boat tubes, where the over-inflation valves control excess pressure.
- 12CE compliance plate and HIN fitted to the aluminium transom
Supplied with the manufacturer’s Statement of Conformity. Registration requirements vary by state — check with your state authority.
- 131 × large Aerowave carry bag — included
One primary carry bag sized to hold the hull, removable air deck, seats, pumps, repair kit and supplied accessories. Fits Aerowave boats up to and including the Viper 430.
Factory-to-door quality control and compliance checks
Before your boat leaves the factory, we run an eight-point quality control and compliance check against your exact order — fabric, seams, transom, inflation, fittings and pack list — so what arrives at your address is what you paid for.
Build sheet lock
Factory confirms hull colour, length, transom spec, floor type and fittings against your order before fabric is cut.
Fabric spec verification
We cross-check the VALMEX® GSM and thickness rating against the signed-off sample so the hull matches what was promised.
Seam and weld inspection
Every main seam, transom joint and chamber bond is pressure-tested and visually inspected before full inflation.
Transom and fitting stress check
Transom height, backing plate and motor-mount geometry are verified against the rated HP max for your model.
Chamber inflation test
Each air chamber is inflated to operating PSI and held to confirm no creep, leaks or valve faults before the boat is signed off.
Pre-shipment photo pack
We receive factory photos of your actual boat before it leaves, so any issue is caught before freight, not after.
Final pack-list audit
Seats, bags, Bimini, pump and accessories are checked off against your configured package list before the carton seals.
Door-step arrival check
You inspect on delivery. If anything does not match the compliance pack, we sort it — no arguments, no run-around.
Build, price, checkout.
Aerowave WaveRunner 380 Series 3 Catamaran Package — pick your package, choose your colours, pay securely.
Your price, delivered to your door — freight included.
We email the full PDF quote (spec, freight, finance, WavePay) to your inbox in under 60 seconds. No spam — one quote, one follow-up.
Talk to Adam or Gary for a written price with freight and import charges clearly separated for your country.
Watch the WaveRunner 380 go from boat bag to water — and back again.
The whole WaveRunner 380 range packs down cleanly for caravan boots, ute trays and compact storage without sacrificing the VALMEX® hull feel on the water.
WaveRunner 380 — from boat bag to ready-to-launch.
Full put-together walkthrough — floor, tubes, transom, ready to motor. Same process across the entire WaveRunner 380 range.
WaveRunner 380 — back into the bag at the campsite.
Deflate, fold, roll and stow. The whole WaveRunner 380 process is built for owners who need a serious boat that still packs away properly.
See it from every angle.
Every detail, engineered to last
From the reinforced aluminium transom to the heat-welded seams and premium 1500 GSM / 1.2 mm VALMEX® fabric tubes — this is what sets the WaveRunner apart.
Frequently asked questions
How do I inflate the hard AirDeck floor to 8–10 PSI?
Use the lithium pump only for the first minute, until the floor reaches approximately 2–2.5 PSI. Then change to the supplied manual pump to reach the recommended 8–10 PSI. Do not use the lithium pump to try to reach final AirDeck pressure; it will not work. The lithium pump is suitable for the boat tubes, and their over-inflation valves control excess pressure.
Check us before you trust us.
Every review is on Google, not on our page
We don't paste quotes onto our site. Open our Google Business Profile and read every review, with the reviewer's profile and the date it was left.
A young business, an honest count
We've been selling Aerowave boats in Australia since 2023. The review count is small because we are — every one of them is a real customer, and every one can pick up the phone to the same small team.
Ask us the hard questions
Call Gary on +61 2 4335 1603. Ask how the hull is built, how it's shipped, what goes wrong and what the warranty actually covers. Straight answers, no script.